dcdigital changelog

3.9.46.62

Morph4K: Refactored standby mode
New: Added WebUI card to change hostname
PS2: Refactored auto adjust. Fixes PAL height detection issue (vertical height auto).
OSD Remote: Added missing controls

3.9.46.51

Morph4K: Improved RX interrupt handling to prevent system stalling

3.9.46.50

Morph4K: More improvements to 240p/480i switching in frame lock mode

3.9.46.48

Morph4K: Improved 240p/480i switching

3.9.46.46

PS1: Fixed no video after update in triple buffer mode

3.9.46.45

Morph4K: Fixed adaptive scanlines regression
Fixed: Wrong OSD size in direct mode for fw update confirmation
N64: Fixed video signal loss after reset
N64: Improved UltraPIF compatibility
N64: Fixed black screen after switching from PAL 288p/576i to NTSC

3.9.46.31

DC (GEM): Fixed force VGA after power-on
DC (GEM): Fixed basic mode force VGA

3.9.46.30

N64: Fixed potential crash during startup
Fixed: Firmware confirm menu not always properly opening after an install

3.9.46.27

Re-visited: Horizontal and Vertical Auto Adjust
Fixed: Shift/Crop: handle out of bounds values

3.9.46.26

Fixed: QR code display for 8x8 fonts (as used by vertical output heights < 480)
N64: Black out console reset during firmware checks/updates to prevent random input data from being displayed

3.9.46.25

PS1: Re-enabled horizontal auto correction: set OSD->Video->Shift / Crop->Horiz. Auto Adjust to on. Value stacks with Input Horiz. Shift.
Fixed: Shift / Crop->Input Horiz. Shift configuration. The stored value has changed, so you might need to re-adjust after an update, if already set.

3.9.46.24

PS1: Hide DV1 direct mode by default (Passthru mode fixes everything wrong about the DV1 (GPU) direct output)
Basic edition: Always do a fill scale instead of integer only (solves PAL content being cut off)
GEM/Digitals: Added option to switch to DVI mode
Naomi: Fixed passthru mode
DC/Naomi: Fixed DV1 direct mode menu
OSD: Redesigned OSD->Video->Direct Mode

3.9.46.14

N64: Added Pixel FX companion app support (no covers yet)

3.9.46.13

Added triple buffer modes ("auto (50/60Hz)", "force 60Hz", "force 50Hz")

3.9.46.12

Fixed: Offset/missing pixels in first line in interlaced passthru mode

3.9.46.11

PS1: Fixed PAL passthru mode issues

3.9.46.10

PS2: Added option to configure repetition detection bits used

3.9.46.8

Fixed: crash when creating debug info on Digitals
Fixed: OSD alignment in passthru mode

3.9.46.7

PS1: Fixed input gamma tables
PS1: Fixed reset to loader
PS1: Fixed PS1Digital (original hardware) failing to send game id

3.9.46.4

Morph4K: Fixed: occasional screensaver freezing after re-connecting signal

3.9.46.2

Morph4K: Screensaver only shows up when no signal has been detected
Morph4K: Preset frame lock mode wasn't saved properly on apply

3.9.46

SD Card Manager: Added ZIP file extraction for ZIP files uploaded to top level SD directory
SD Card Manager: Apply presets from WebUI

3.9.44

Fixed: Mask transform getting stuck on last option
Morph4K: Slotmask editor now supports .ini mask uploads
Morph4K: Slotmask editor now loads intensity/conversion settings properly

3.9.43

New: Added mask intensity setting
Fixed: Mask alignment and offsets
Fixed: OSD settings menu line duplication
Morph4K: Fixed: GBC MiSTer DV1
Morph4K: Use filename for "single" mask file uploads (when not using SD Card Manager)
Morph4K: Fixed screensaver
Morph4K: Retro-FX menu mask caching
Morph4K: SD Card Info OSD screen
WebUI: Toggle firmware update with specific version/channel without changing configured update channel

3.9.32

MA: Improved motion handling
Morph4K: Return to selected item/folder after applying preset
WiFi: Option to disable http credentials

3.9.27

Morph4K: Fixed: no image after exiting standby
Morph4K: Disable fan in standby mode
Morph4K: Fixed: Gameboy MiSTer DV1
WiFi: limit minimum RSSI to -60dBm (80%)

3.9.25

New: Efinity version 2024.1.163
Morph4K: Manual fan speed control
MA: Noise threshold wasn't saved properly

3.9.20

Morph4K: Fixed OSD alignment issue

3.9.19

WiFi: Fixed: Captive portal
WiFi: Improved QR code generation

3.9.18

SD Card Manager: Fixed MiSTer mask import into subdirectory
Fixed: OSD "TX SCDC Status" falsely reporting scrambling error when scrambling is off

3.9.17

Morph4K: Finalizing analog card integration
Morph4K: Alternative FPGA FW loading/configuration
FW update: check version instead of MD5 checksum for update available
Slotmasks: Fixed: Map slotmasks to profiles on Morph

3.9.10

Morph4K: Web UI: Handle overflow in SD Card Manager

3.9.9

Updated: littlefs
Web UI: Multi file upload
Web UI: Temperature monitor
Web UI: Fixed disabled overlay in Web UI now has proper height when overflowing
Addressed: Green dots
Morph4K: Modified default EDID to properly advertise AC-3 (DD) and DTS support
Morph4K: Added EDID to only advertise 2 channel (L)PCM support (2ch-pcm-only.bin)

3.9.2

Fixed: Mask import via Web-UI crash

3.9.1

Morph4K: Addressed 480i speckles

3.9.0

Morph4K: HDR10 color correction
Morph4K: 12-bit linear light pipeline
Morph4K: Color correction
Morph4K: SMPTE 2084 Perceptual Quantizer with adjustable nits
Morph4K: Dithering
Morph4K: Saturation control
Morph4K: Input/output gamma function controls
Morph4K: Color profile support
Morph4K: D93 white point correction (via profile)
Morph4K: Preset rebuild
Morph4K: SD Card browser
Core: Fixed gameid settings were hidden
Morph4K: Prevent PAL -> NTSC switch on signal loss
Morph4K: Fixed OSD tile shift
Morph4K: Right side blanking
GEM/Digitals: Addressed green dots on 1440p output
N64/PS2: Fixed PAL mode issues
Core: Fixed adaptive scanlines
Core: Fixed potential null pointer access
GEM/Digitals: XBR fixed
Morph4K: PS1 DV1 support
N64: PAL console initialization
FW Update package versions conflicts resolved. Downloaded firmware (either from the embeded links or the firmware download page) now should always work in both manual update and recovery system.
Morph4K: Video output was getting into a weird state, when powered up without an input signal and frame lock enabled.
PS2: Fixed image getting messed up after switching from 256/512 PAL back to 240/480 NTSC

3.7.30

Motion Adaptive Deinterlacing: Morph 4K core ported to all GEMs / Digitals
FX-Direct / DV1 direct mode for all GEMs / Digitals
Morph4K: Enter standby mode from "Restart" menu
Morph4K: Added signal modifier setting
GEM DC

3.7.10

Core: Sped up Retro FX menu loading
Morph4K: More debug logging

3.7.6

Morph4K: Set default LED color (LED color can be applied to OSD as well (kind of, 24bit RGB LED vs 6bit color on OSD))
Morph4K: Added debug logging option

3.7.2

MA: Added more sensitivity options.

3.7.1

MA: Added interpolation and detection settings.

3.6.2

MA: Changed default sensitivity and added menu option to configure it in three steps ("low", "normal", "high")
Morph4K: Fixed direct video on MiSTer cores that used line lengths greater than 4K pixels
Morph4K: DV1 mask pixel repetition when menu is open
Morph4K: Updated default input EDID to propely indicate multi channel audio support
Morph4K: Fixed pixels on right and bottom

3.6.0

Morph4K: Fixed sync loss when switching resolutions with frame lock enabled

3.5.5

Morph4K: Fixed Dolby Digital 5.1 and DTS passthrough
Morph4K: Fixed DV1 width calculation, when stacking with AVI PR
Morph4K: Improved auto AR detection (when AVI IF data is missing)
Morph4K: Custom modelines do no longer require extra (undocumented) parameters

3.5.4

Morph4K: Fixed stored shift / crop config values get reset.
Morph4K: Fixed set zoom level from preset
Morph4K: Fixed potential black screen when switching input resolutions (prescaled to non-prescaled)
Morph4K: Fixed VRR base frequency for 120Hz modes
Morph4K: Mister DV1 auto adjust option

3.5.2

Pixel FX companion app ready
ESP: Memory optimization

3.5.1

Morph4K: Prepared per game ID settings
Core: Fixed most alignment issues, pre-scaler improvements
Core: Fixed frame lock lag misalignment
Changed: DV1 pixel repetiton now stacks with AVI IF pixel repetition

3.4.1

Morph4K: Addressed TV/monitor might not sync when started with active input source
Morph4K: VRR refinements

3.4.0

Web-UI: Added reset settings but keep WiFi
Morph4K: Changed esp memory allocation strategy

3.3.0

Morph4K: New VRR options: "disabled", "off", "auto", "vesa" and "freesync"

3.2.11

Added OSD position configuration
Morph4K: Modified auto AR fallback when no AVI info frame data is available
Morph4K: Added "power down" (and up) via IR remote (experimental, feedback appreciated!)
Web-UI: Added buttons to delete uploaded .ini files
Slotmasks: Fixed masks being displayed wrong when the mask width is below 4
Slotmasks: Added "Multiply by 2" transformation to scale masks made for 1080p on 4K output
Fixed: Factory reset settings now properly resets all settings
New factory reset option to do a factory reset, but keep the WiFi configuration
Morph4K: Generate EMP for VRR

3.2.4

Morph4K: Reset output resolution to 1080p/frame lock off by holding 6th button for 6sec
Morph4K: Fixed screensaver
Morph4K: Added RX color space and EDID configuration to the OSD

3.2.2

Updated to esp-idf v5.2.1
SNES OSSC jitter fix

3.1.0

Morph4K: added sdcard based firmware install to main firmware via OSD
Updated to esp-idf v5.2
Morph4K: fixed frame rate display for 100/120Hz modes
Morph4K: upload to sd card via Web UI

3.0.5

Morph4K initial release

2.6.19

PS1: Improved data aquisition

2.6.18

New efinity version
Fixed: MiSTer shadow mask import

2.6.17

Direct mode: changed de_h/de_v values

2.6.16

Direct mode: changed width/height reporting in the DV1 meta data

2.6.15

PS2: Fixed OSD@1440p

2.6.13

Fixed: 480p mode
Changed: bob now runs bob offset mode.
Changed: MA now uses bob offset for motion instead of blend
PS1: Fixed 384 mode. Many thanks to FirebrandX for pointing out there is no 368 mode on PS1.
Re-enabled smoothing

2.6.8

Updated direct video SPD info frame to match changes

2.6.6

New: direct mode
Fixed: motion adaptive deinterlacing

2.6.3.19

PS2: input video format detection adjustments

2.6.3.14

PS1: Adressed output stops working after switching between NTSC <-> PAL

2.6.3.13

Clock adjust refinements

2.6.3.12

Clock adjust refinements
Morph: temperature sensor
PS2: direct mode
Morph: prepared to get prescale setting from GEM/Digitals

2.6.3.6

Re-enabled dynamic clock handling

2.6.3.4

New scaler implementation
More debug screens
Web UI: Manage RX (user) EDIDs
Morph audio: Added 8 channel PCM support

2.6.2.38

User EDID upload

2.6.2.37

Refined DVI mode handling

2.6.2.35

More HDMI analyzer screens

2.6.2.34

Expose some OSD settings

2.6.2.33

Internal release

2.6.2.32

Interpolation functions

2.6.2.31

Build system improvements

2.6.2.30

RX debug improvements

2.6.2.29

Standard 4K50 modeline

2.6.2.28

RX improvements

2.6.2.27

Added RX debug

2.6.2.25

Enable Morph remote control with any EDID

2.6.2.22

Morph4K pre-release

2.6.2.20

Temporarly removed triple buffering again, becasue it was causing issues with MA

2.6.2.19

PS1: Reset manual vertical height properly, when switching from PAL->NTSC

2.6.2.18

PS1: Prevent controller input doubling in certain games

2.6.2.16

PS1: Added manual height control for PAL

2.6.2.15

Improved MA
Improved adaptive scanlines
Added triple buffering (Frame Lock->off setting)

2.6.2.12

Fixed: Restore factory defaults
Fixed: Deinterlacer changes removed interpolation settings

2.6.2.11

Added Simulate CRT deinterlacer
PS2: Fixed PAL 256 detection
PS2: Tamed horizontal auto detect
Improved MA
Added screensaver

2.6.2.3

PS1: Fixed L/R channel swap
PS2: Fixed reset was shutting down console
PS2: Improved controller signal detection
PS2: added S/PDIF audio setting
Note: Above bundles bugfix releases 2.6.1.17 to 2.6.1.25

2.6.2.0

Internal: dev version

2.6.1.16

New universal hardware
N64 Basic Edition: Deblur

2.6.1.8

Retro G.E.M. launch firmware

2.4.1.15

Merged branches
Integrated WiFi setup wizard into user.html

2.4.0.23

Internal: build universal firmwares from the same project
PS2: Added Game ID (only works with OPL version capable of sending the ID)
PS2: Game id to name resolving

2.3.0.54

Added example / placeholder files for user ini files in Web-UI
N64: Fixed "South Park Chef's Luv Shack" showing the "No Signal!" screen
Web-UI: now supports dark/light theme
Improved CEC-Logging for all supported TX chips
N64: Fixed wrong input alignment on p/i change and vice versa
FXDigital: preparing for release
FXDigital: added N64
Added screensaver
Rollback now supports system level rollback
Internal: Rescue-System 2.0.0
Fixed "Clock Adjust" "off" keeps resyncing in certain conditions
Internal: Also check update integrity (checksum+signature) on install before activating the update partition
Internal: Added PS2

2.1.45

DC: Added experimental controller overlay, coming to more consoles soon!

To open: OSD->Sytem->OSD->Start controller overlay, then press B

To close: Press and hold the menu open button combo for ~5 seconds
DC/Naomi: Automatically open wifi setup wizard only, if wifi is unconfigured and no controller is connected.

2.1.43

N64 HW2: Fixed glitching on some consoles
Fixed: Stretched OSD on 720p and 2x pixel repetition modelines
Internal: Upgraded to ESP-IDF v5.0.1

2.1.41

N64 HW2 fine-tuning
Re-enable firmware available check

2.1.40

Fixed: Wrong color issues should be resolved

2.1.39

DC: Fixed MagiClock drift when switching between 240p and 480i

2.1.38

Fixed: Slotmasks

2.1.34

PS1: Ported "Clock Adjust" modes from BDT firmware
Fixed: VGA/480p output resolutions are now working with all deinterlacer modes (specifically for @Mathieulh :))
Fixed: OSD "desync" on fast button presses

2.1.29.16

Preparing N64Digital HW2 release (Part 2)

2.1.29.15

Fixed: Potential glitch on narrow input widths

2.1.29.14

DC: Added OSD/res switch only controller mode for fighting game compatibility (thanks to @INSIDIOUSZ09)

2.1.29.13

N64: Revised controller polarity detection

2.1.29.12

N64: Fixed controller flex detection again

2.1.29.11

N64: Fixed controller flex detection

2.1.29.10

Preparing N64Digital HW2 release

2.1.29.9

Web-UI: Fixed preset create form

2.1.29.8

DC: Fixed 480i boot misdetects VGA mode

2.1.29.7

DC: Fixed "black dot" in OSD background

2.1.29.6

Web-UI: Added "Factory Reset" and "Manual FW Update" cards

2.1.29.5

DC: Fixed interlaced resolution startup

2.1.29.4

DC: Fixed resolution switching lockup
DC: Fixed vertical shaking issue with 240p/480i input

2.1.29.3

New: Improved self diagnostics

2.1.29.2

Fixed: Occasional OSD crash when exiting Debug/Self Test
Fixed: DC reset issues when MagiClock is disabled

2.1.29

DC: Hydro Thunder VGA compatibility

2.1.28

DC: Fixed optional pin function

2.1.26

DC: Added documented controller combos
Fixed: FW update fails, if FW was rolled back
Fixed: Font loading failure in 1440p

2.1.24

PS1: Gamma stage optimizations

2.1.23

DC: Fixed startup quirks

2.1.22

N64: Fix HW1/HW2 driver detection

2.1.21

N64: Fixed reset
N64/PS1: Fixed missing deinterlacer menu

2.1.19

Internal: Upgraded to ESP-IDF v5.0
HDR: Added new option to HDR inject.

"off" disables HDR within the info frame, "disabled" stops sending the info frame.

2.1.17

N64: New hardware support

2.1.14

DC: Added Naomi support

2.1.12

New: Improved color expansion detection
Web-UI: Basic OSD remote control
Fixed: Winter theme on PS1 and DC

2.1.8

PS1: Tamed horizontal auto alignment correction
DC: Firmware ready
N64: Added MPAL support

2.1.4

N64: Revisited color banding issue introduced in 2.1.0
DC: Added DCDigital to FX-Framework

2.1.3

Fixed: Previously saved gamma value was shown as <UNKNOWN> after a restart
New: Allow 3 custom modelines
New: Allow up to 8x zoom in scaler settings
N64: Fixed color banding issue introduced in 2.1.0
New: Added game id readout to the http api
New: Added xxDigital restart to the reset menu

Handy, if you want to apply settings which require a restart, without leaving your couch :)

2.1.0

PS1: Fixed clock initialization issues in 2.0.2
PS1: Option to enable scaler aspect ratio setting per input resolution
PS1: 1920x1440p custom modeline is now working
New: Modelines now support TX PLL pixel repetition
Changed: Reverted HLG colorimetry back to BT.709

2.0.2

N64: Fixed post reset operation setting
PS1: Fixed uneven scaling introduced when scaling to or beyond display size
PS1: Restored console reset button press detection
PS1: Restored clock setup detection

2.0.1

Fixed: Right screen border scaling pixel shift
Improved: 240p/480i switching
Improved: WiFi setup wizard allows setting username/password for the web interface
Changed: OSD resolution display
PS1: reset button combo/hotkey now triggers a full_reset_console to reset back to ODE loader/menu
PS1: added door/lid switch to custom button mappings
PS1: Earlier lid/door handler init to prevent MODE to detect a lid switch during startup
PS1: Fixed 1200p output
N64: Fixed PAL issues

2.0.0

FX Framework now supports PS1Digital
Motion Adaptive deinterlacing
Code refactor work. Vendor specific IP removed.
HDR10 support added. Thx Steve; https://bit.ly/3cXdxYf

1.6.7

Internal: optional SPD InfoFrame disable

1.6.6

CEC debug

1.6.5

New: Full RGB slotmasks (superset of MiSTER v2 scanlines)
New: Web-UI slotmask editor with live preview
New: Added optional check for new firmware on startup (Main Menu->System->OSD->Version Check)
New: Option to disable HDMI video output realign on console reset (Main Menu->Video->Advanced Video->Post Reset Op)
Improved: After being connected to the WiFi setup AP, the OSD shows a link to force the setup page to open.

1.5.14

New: Optional user preset category
Added documentation links to all WebUI features

1.5.12

New: Custom gamma tables via WebUI
New: WebUI overhaul

1.5.7

Fixed: Adaptive Scanlines

1.5.6

New: Custom pixel/display aspect ratios
New: Redesigned preset menu
Ex-/Import slotmask (shadowmask) to/from MiSTer via WebUI

1.5.0

New: OSD color support
New: Gamma adjust
Improved WiFi connectivity
Improved Slotmask Creator

1.4.9

Fixed: Scanline thickness was set to out of bounds value after applying default preset

1.4.8

Fixed: Adaptive scanlines banding issue (since 1.4.4)
New: Config now saves all video settings (except Video->Advanced Video) per video standard/output resolution

1.4.5

Fixed: hdmi timings off by one (since 1.4.4)

1.4.4

New: FXR smoothing
New: User presets via WebUI
Changed: OSD re-arrangement

1.3.4

Internal optimizations

1.3.3

New: Slotmask Creator

1.3.2

Fixed: Memory leak in mask parser

1.3.1

New: Retro FX filter system
- Slot mask
- Shadow mask
- High TVL aperture grill modes
New: Custom controller hotkeys / button combo mappings
Added clock info to Debug / Self Test
More low level debug screens

1.2.4

Fixed: Verify EDID checksums

1.2.3

Fixed: rounding issue with per game settings
New: Added default preset to represent (factory) default settings
Fixed: white line between scanlines with scanline glow > 90

1.2.2

Fixed: YPbPr analog output wasn't selectable in OSD

1.2.1

New: Component/YPbPr analog output
New: Presets
New: Improved scanline system
- Adaptive mode
- Aperture grill preset

1.1.2

Fixed: show left/right crop values based on input width
Fixed: swapped vertical/horizontal scanlines designator

1.1.1

Fixed: changelog "word salad" on long lines

1.1.0

Changed: crop is now input image based
PAL: automatic 288p/576i detection
Fixed: scanlines misalignment with interpolation off
New: horizontal scanlines

1.0.0

Improved audio, normalized audio sample rate (48kHz)
Scaler improvements
Fixed: PAL 576i mode

0.150.1

Increased allowed controller response idle time to 64us

0.150.0

Fixed: Support for various third party controllers

0.140.5

Fixed: Output Resolution now marks "global" and "per game" setting correctly

0.140.4

New: Handle default values correctly for "per game" config

0.140.3

Fixed: Treat Per Game Setting as "per game" when global config context resolves to default value

0.140.2

Fixed: HTTP server: delivery of /edid.txt and /edid.bin
New: Custom modelines are parsed on upload now

0.140.1

Fixed: HTTP server: delivery of /user.html

0.140.0

New: Game ID handling and Per Game Settings
New: Custom modeline support
Fixed: OSD Scaler menu PAL Input Height wasn't selectable
Fixed: Snake max tail length (thanks to twotonejuggler for getting the previous max score)

0.130.0

This version requires a bootloader update:

After updating and restarting, go to Update Firmware again to start the bootloader update.
Fixed: Left and right audio swapped (#28)
Fixed: Scaler vertical dots and alignment issues (#25, #1)
Fixed: Optimized boot process (#22, #3, #2)
Fixed: WiFi / factory reset (#15, #11, #4)
New: WiFi wizard now supports entering a hidden SSID (#14)

0.123.0

New: Button combos

Res. switch: L + R + PAD_UP + C_UP

N64 reset: Z + R + A + B + START

0.122.0

Fixed: "Vertical dots bug"
Fixed: No forced reset on bootup

0.121.0

New: Allow resetting settings: only WiFi and / or all settings
New: Firmware update channel selection: stable or testing

0.120.0

Initial public firmware